Manually Setting Up A Wireless ADSL Router
1. Install ADSL filters on the phone lines.
A) You need to install an ADSL filter for every telephone that uses the same phone line as your wireless ADSL modem router. Select the filter that came with your wireless ADSL modem router.
1. One-Line Filter: Use with a phone or fax machine.
2. Splitter: Use with a one-line filter to share an outlet with a phone and the wireless ADSL modem router.
3. Two-Line Filter with Splitter: Use to share an outlet with a phone and the wireless ADSL modem router.
B) Two-Line Filter Example. Insert the two-line filter into the phone outlet and connect the phone to the phone line connector (A):
2.Connect the wireless ADSL modem router to the ADSL filter.
A) Using the included phone cable with RJ-11 jacks, connect the ADSL port (B) of the wireless ADSL modem router to the ADSL port © of the two-line filter.
B) Connect the Ethernet cable (D) from a wireless ADSL modem router LAN port to the Ethernet adapter in your computer.
- C) Connect the power adapter to the router and plug it in to a power outlet. Verify the following:
The power light is lit after turning on the router.
The test light comes on briefly, then goes off.
The wireless light is lit after turning on the router.
The ADSL light is green, indicating you are connected to the ADSL network.
D) Now, turn on your computer. If software usually logs you in to your Internet connection, do not run that software. Cancel it if it starts automatically. Verify the following:
The local lights are lit for any connected computers.
3. Log in to the wireless ADSL modem router.
In your browser, copy your ADSL router IP like for digicom its 192.168.1.1 . It is different according to their specific Router.
Here is a video for Digicom Adsl Configuration!
0 comments:
Post a Comment